ACS Skid plates are designed in 1/4” HDPE plastic resistant and are an abrasion-resistant material affixed to the underside of the Snowmobile chassis preventing damage to the underside when contact is made with the ground.
Shop
-
Spring Pullers
Spring Puller 17″
This handy spring tool will remove exhaust pipe springs, tank or seat holding springs, cotter pins and many other hard to access parts. ACS Spring Pullers are made of steel and are zinc plated to resist rusting.
- Handling – The ACS Spring Puller is designed with a T-handle to ensure a solid grip while removing springs.
- Length – 17″ long heat treated mild steel with a multi-function head. Long, T-handle design to push, pull and twist springs in those tight, hard to reach spaces.
-
Spring Pullers
Spring Puller 7 – 1/2″
This handy spring tool will remove exhaust pipe springs, tank or seat holding springs, cotter pins and many other hard to access parts. ACS Spring Pullers are made of steel and are zinc plated to resist rusting.
- Handling – The ACS Spring Puller is designed with a T-handle to ensure a solid grip while removing springs.
- Length – It has a length of 7-1/2” to reach those distances that are difficult to get to.
-
Tunnel Protectors
Tunnel Protectors
- A must when installing studs
- 100% aluminum
- Pre drilled to match most stock Polaris mounting holes
- Easily adaptable to Arctic Cat and Yamaha sleds
Ski-doo nylon tunnel protectors replace stock protectors, slides into existing slots in heat exchangers.
-
Ice Scratchers
Universal Ice Scratcher Kit
- The ACS Universal Ice Scratcher will fit on any sled and will drag along hard packed conditions to turn up the snow and ice to keep sliders and heat exchangers cool. When not needed the ice scratchers can be lifted and placed onto the skid frame so they are out of the way. Universal Ice Scratchers are sold in pairs.
- Design – Our ice scratcher is made of Spring Steel which has a very high yield strength. This allows our Universal Ice Scratchers to return to their original shape despite significant deflection or twisting during use.
NOTE: Scratchers must be lifted onto the skid frame when reversing - Universal – ACS Universal Ice Scratchers can be installed on virtually any snowmobile. Comes with clear installation instructions for a quick and easy fit.
-
Washers
Washer BW 20-5AL-1/4″
1-Thickness- The washers are 0.200″ thick for optimal strength.
2- Dimensions – The washer’s inside diameter is 1/4″. The outer diameter is 1.175 “ .
-
Washers
Washer BW 20-5AL-1/4″
1-Thickness- The washers are 0.200″ thick for optimal strength.
2- Dimensions – The washer’s inside diameter is 1/4″. The outer diameter is 1.175 “ .
-
Washers
Washer BW 20-5AL-5/16″
- Thickness- The washers are 0.200″thick for optimal strength.
- Dimensions -The washer inside diameter is 5/16″. The outer diameter is 1.175″ .
-
Washers
Washer BW 20-7AL
1- Thickness The washers are 0.200″ thick for optimal strength.
2- Dimensions The washer inside diameter is 5/16″. The outside diameters is 1.175″ .
-
Washers
Washer BW 30-5AL-5/16″
1- Thickness – The washers are 0.200″ thick for optimal strength.
2- Dimensions – The washer’s inside diameter is 5/16″. The outer diameter is 1.375 “ .
-
Runners
Wear Bar Runner
Designed specifically for C&A Pro Mini skis, this non-carbide wear bar is ideal for children’s snowmobiles used in low snow conditions.
