• This push through stud is most popular due to ease of installation

  • Carbide delivers durability and good trail traction

  • The rounded head has a radius that allows you to place the stud directly under drive and idler wheels

  • 1" head overcome torque loads

  • High nickel content for maximum strength when heat treated

  • Machined, not cold headed to allow us to use better material

  • Nyloc Nut included

PART# QUANTITY "A"SIZE LENGTH THREAD
 
PT2800C-24 24 15/16" 0.938" 7mm
PT2800C-96 96 15/16" 0.938" 7mm
PT2800C-500 500 15/16" 0.938" 7mm
 
PT2900C-24 24 1 1/16" 1.062" 5/16"
PT2900C-96 96 1 1/16" 1.062" 5/16"
PT2900C-500 500 1 1/16" 1.062" 5/16"
 
PT3000C-24 24 1 3/16" 1.187" 5/16"
PT3000C-96 96 1 3/16" 1.187" 5/16"
PT3000C-500 500 1 3/16" 1.187" 5/16"
 
PT3100C-24 24 1 5/16" 1.132" 5/16"
PT3100C-96 96 1 5/16" 1.132" 5/16"
PT3100C-500 500 1 5/16" 1.132" 5/16"
 
PT3200C-24 24 1 7/16" 1.437" 5/16"
PT3200C-96 96 1 7/16" 1.437" 5/16"
PT3200C-500 500 1 7/16" 1.437" 5/16"
 
PT3300C-24 24 1 9/16" 1.562" 5/16"
PT3300C-96 96 1 9/16" 1.562" 5/16"
PT3300C-500 500 1 9/16" 1.562" 5/16"

 

 
  • Best penetration

  • This stud has a dual function

  • Align the stud in the direction of travel for acceleration

  • Rotate the stud 90 and it is better for cornering

  • Snow cross conditions

  • 7mm thread

PART# QUANTITY LENGTH
     
MW2825-24 24 0.75"
MW2825-96 96 0.75"
 
MW2850-24 24 0.875"
MW2850-96
 
96
 
0.875"
 
  • 80 point for best possible durability and penetration from a carbide stud

  • 1/4-20 thread

PART# QUANTITY LENGTH
     
CP2825-24 24 0.75"
CP2825-96 96 0.75"
 
CP2850-24 24 0.875"
CP2850-96 96 0.875"

Back